IBERCISA EQUIPMENT1 x Vertical Electric Anchor Winch:
- Drum capacity: 20 m. Ø26 mm. (wire)
- Nominal line pull and speed at:
  Nominal power
  - Drum 1st layer : 6,0 t; 0 - 13 m/min
  - Drum 2nd layer: 25,5 t; 0 - 14 m/min
  40% overload
  - Drum 1st layer: 8,4 t ; 0- 23 m/min
  - Drum 2nd layer: 7,7 t ; 0- 25 m/min

- Remark: With the winch controlled by means of a frequency converter can be obtained pulls 40 % higher than the nominal ones and variable speeds between 0 and 80 % superior than the nominal ones.

OTHER EQUIPMENT2 x Hydraulic Driving Equipment and Controls:
- Pressure and oil flow required: 200 bar ; 165 l/min.
2 x Electric Capstans · 45 kW:
- Warping head diammeter: Ø 900 mm.
- Pull and Nominal speed:
  - First Speed: 16,0 t ; 15 m/min
  - Second Speed: 8,0 t ; 30 m/min
2 x Hydraulic Anchor Windlass:
- Capacities:
  - Chain lifter: chain Ø 100 mm. U3.
  - Drum: 200 m. Ø 80 mm. (rope pp.)
  - Warping - head: Ø 750 mm.
- Pull and nominal speed:
  - Chain lifter:
    65,0 t ; 0 - 11,5 m/min
  - First layer drum:
    16,0 t ; 0 - 45,0 m/min
  - Warping - head:
    17,0 t ; 0 - 42,0 m/minOTHER EQUIPMENT1 x Hydraulic Driving Equipment and Controls:
- Pressure and oil flow required: 200 bar ; 490 l/min
- Chain lifter (2’): 1,5 x nominal pull ( 300 bar )
- Static brake chain lifter: 324 t
- Static brake capacity: 95 t
2 x Chain stooper ø 100 mm. U3

IBERCISA EQUIPMENTHydraulic Towing Winch:
- Drum capacity: 500 m. Ø40 mm (wire) + 75 m Ø80 mm (rope)
- Warping end diameter: Ø450 mm
- Nominal Pull and speed (drum 1st layer): 25 t; 22 m/min
- Nominal Pull and speed (full drum): 10 t; 55 m/min
- Pressure and flow required: 250 bar; 315 l/min.